When we face technical issues to login in the Admin panel of the repeater page, some of us do multiple jobs to make the repeater up for working.So here I am going to troubleshoot all the problem which may come during the repeater login.
My repeater wireless says unsecured no internet.
It means the repeater is not working yet we need to do troubleshooting.
- Make sure the WiFi repeater is the hook to the wall outlet direct.
- The power light should be stable.
- WiFi repeater should be hooked up wireless or hardwire to a device.
- Check the repeater IP address.
- If you are using an ethernet connection, make sure the wire is good.
How do I check the repeater IP address?
The default IP address is 192.168.10.1, If you cannot access the login page through IP address, make sure the WiFi Repeater runs under the same IP address. Here I will let you know how to check the IP address of the repeater.
- WiFi repeater should be connected to the devices like PC, Laptop wireless or hardwire.
- Go to the Network adapter setting> choose ethernet or wifi adapter> Right-click> Status> Details> IPV4 default gateway IP address.
- If you are not getting any IP there or IP address starts 169.28.*.*, then go ahead and reset the WiFi repeater and check again.
- If still, you having the problem then try to do a hard reset for 1 minute on the WiFi repeater.
WiFi repeater set up, but I do not have access to the login page.
It means your WiFi repeater is set up and working and you want to log in again the myrepeater.net page for changes, but it’s not working so here you can follow the steps.
- Connect any WiFi device like PC, Laptop, Smartphone with a wireless repeater network.
- Clear the cookies and cache from the browser, or you can reset the browser settings.
- Disable the unwanted browser extension which works in the background.
- Login the modem router admin page and check the WiFi repeater IP address for login.