If you want your wireless signals to reach every corner of your home or office then you should go for Wireless-N Wi-Fi repeater. Wi-Fi repeaters are little gadgets in which a client can connect to an electrical outlet and interface with their routers. Merely after completing WiFi repeater login by using, you can enjoy the high-speed internet all across your property. You can finish the setup procedure by following some basic wireless repeater setup instructions. Presently, if you don’t know how to set up a wireless repeater, at that point we are here to assist you with it through this site. Also, if you are facing some issues with your wireless-n repeater, you can get to know about WiFi repeater troubleshooting through this website.

Utilizing wireless-n WiFi repeater can fill in the dead zones by taking your router’s current Wifi signal and rebroadcasting a broad signal that’s aimed home’s unconnected gadgets.

Wireless-N WiFi Repeater offers extraordinary wireless inclusion through the 3dBi incredible internal reception antennas. Easy Setup Set up and running in minutes with the quick setup guide, compatible with any router.

Now transfer files at the speed of up to N300 + AC344 Mbps. No Need for Setup CD for wireless-n WiFi repeater and fully loaded with Security Features such as WPA/WPA2 wireless security encryption. Setup is the public local admin domain accompanied by .net extension. is the destination site address to get the ingress to wireless-n WiFi repeater login advances to default scientific web protocol (IP address) In a like manner, you can obtain the admittance to setup page.

How Do I access Wireless-N WiFi Repeater?

To extend the range and coverage territory of a current wireless network through a web interface, you have to complete the WiFi repeater setup. Before configuring your repeater, you have to log into it utilizing Presently, if you are wondering how to log into wireless-n repeater you need to follow the steps which are given below:

Wireless-N WiFi Repeater Login

  • Make sure that you’ve placed your wireless repeater near to your wireless router.
  • Ensure that your WiFi repeater is powered on, the power LED light green and wireless-n repeater device is connected to a power source.
  • Now, take an Ethernet cable and use it to associate the repeater with the gadget that you will use to configure the WiFi repeater.

Note: You won’t be able to reach the setup page if you’re not connected to the repeater via Ethernet or wireless. login
  • Launch any of your Web programs and type in the address field. Likewise, you can use the repeater’s IP address, the most common IP for wireless-n WiFi repeater is
  • A login pop-up will show up on your screen requesting your default username and password.
  • The default username, as well as the password for the wireless-n repeater is admin.
  • After filling the login details, you will appear to the WiFi repeater setup dashboard.

How to setup wireless-n WiFi repeater?

There are two modes available for Wireless-n WiFi Repeater Setup: AP(Access Point) mode and Repeater mode. Both methods require you to access the setup page.

Setup as an Access Point

Setup as a Repeater Mode setup setup

“Figure out How to do a New Repeater Setup as an access point”. Firstly a quick intro about the access point. Access Point is a way of setting up the repeater as an Access point or router through which one can setup multiple wireless repeaters. The steps to Setup the wireless-n repeater as an Access Point are as follows:

  1. Hardwire your wireless-n WiFi repeater directly to your router’s LAN port.
  2. Login in to your repeater default setup page by typing the web address into the Address bar of your browser from your PC, laptop or cell phone, etc.
  3. You can also do that by directly typing the “default IP address” i.e.
  4. When you are signed in it will take you to the setup wizard which will pop-up the inquiry “How you need to Setup this repeater” “as an AP mode” or as a “Repeater mode “.
  5. Select the Access Point option at that point enter your Main Router’s password and afterward hit next.

Follow the on screen instructions and your repeater will be set up as an ACCESS POINT.

Searching for how to dispose of dead zones for all time? Even though your switch uses most recent innovation and has world-class includes however when you are sitting in a side of the home or office, you don’t get WiFi signals and accordingly can’t get to the web. A repeater is the best solution to remove these issues. So, follow the steps to setup the repeater:

  1. Ensure the repeater is properly plugged into the power source.
  2. Make a connection between the repeater and smart device via Ethernet cable or wireless in which you are going to set up a wireless-n repeater.
  3. Open login page using one of the following URLs:
  • Visit
  1. Enter the authenticated username and password for logging in. the default credentials are: Username: – admin and Password: – admin
  2. Next, you need to choose the repeater mode option and create the SSID and password for the repeater’s wireless network.

Click Finish to complete the configuration.  Relocate the repeater about halfway between your main router and the Wi-Fi dead zone.

How to Change the Password on WiFi Repeater?

WiFi Repeater password not working or you don’t remember the login information like the username or the wireless password, at that point there is a way to recover them. In this case, you can reset the device to restore all the default manufacturer settings. Find the reset button underneath your repeater and press it for about 10 seconds. This reset button is found on the base of the repeater. You can likewise set up a strong password for your Wi-Fi repeater.

Step1. Open the browser and navigate to page. Here, the two empty boxes will be provided for username and password.

Step2. Enter the login credentials for your repeater. Fill in them accurately and proceed further.

Step3. Go to the wireless settings on page and there you can change the wireless password.

Sometimes, the impediment in connection emerges in light of the fact that you have unintentionally turned on the airplane mode on your gadget. Along these lines, watch that and ensure the gadget is associated with the main router appropriately. At times, the reason for the issues is that the gadget is set excessively a long way from the current router or there are such a large number of physical impediments that are not letting a decent association with build-up. This causes a fall in the network and then continues losing the web. If you do not see the Wi-Fi connection in the list that means the device is not in range. To fix that carry it closer to the existing router. There could be various reasons behind poor availability and we will assist you with fixing every one of them.

Wireless-N WiFi Repeater Keeps Going Offline? FIX

Wifi repeaters improve the signal quality for various purposes like online streaming, data transfer, online gaming, and all other smart devices. However, users face a lot of issues after installing the repeater and one of the most common issues is WiFi repeater keeps going offline. In case you’re likewise encountering this issue with your repeater, you’ve arrived on the right website. Here, you’ll get the complete guidance to diagnose and troubleshoot your repeater related issues. offline
  1. Check Your Repeater’s Connections

The most obvious or simplest way to fix any technical issue is by checking the connections. So, please follow the below-mentioned steps to eradicate this issue.

  1. The repeater is properly connected to a power socket and ensure that the internet LED is solid on your router or modem.
  2. Ensure that the Ethernet cable you’re using is a cut-free.
  3. The wireless repeater is getting continuous power supply so make sure that you’ve connected your repeater to a wall outlet. Do not connect it to the search protector.


  1. Go through the device manual and check the status of the LED’s
  2. Read the user manual and check the status of the LED on a repeater.
  3. Do not initiate the setup process, till the LED light doesn’t glow as solid green.
  4. If the status of the power LED is blinking, power cycle the wireless repeater.
  5. Disconnect the repeater from the electrical socket, wait for 10 seconds and connect it to the power source.


  1. Update Repeater’s Firmware

An outdated firmware version may also result in repeater offline issue. So, ensure if your repeater is running on the most recent firmware version. Also, follow the steps to upgrade the repeater’s firmware.

  • Launch any of your Web Programs.
  • Type web address in the URL bar and login.
  • Click on the Firmware Update option.
  • Patiently, wait for some time and let your repeater install the latest version of the firmware.


  1. Reset Your Repeater
  2. Find the reset button on your repeater.
  3. Once you find the reset button, press and hold it down for 8-10 seconds.
  4. Wait for the rebooting process of the repeater.
  5. Now, your repeater has been reset. You can configure your repeater again from scratch. Setup IP is the default IP address for setting up the Wireless-N WiFi Repeater. Whenever you’ll need to login to WiFi repeater open a web browser and access as a URL. But when clients try to access this page via IP address, they get an error message “this page cannot be displayed” If you also come across this error message and looking for a solution then read this article carefully. In this article, we mention some of the resolution steps that will help you to eradicate this issue. Follow the steps:

  1. Power cycle your repeater.
  2. Upgrade the firmware of your repeater via page.
  3. Check the device connectivity to the router by pinging the IP address
  4. Reset your repeater by holding down the reset button for 8 seconds.
Close Menu